HomeOld modelsNetControl 4RU1T1A

NetControl 4RU1T1A (Obsolute model)

Note: This model is no longer manufactured!

You can reaplace it with NetControl 4RU2S1A.

Introduction

This model is specially designed to fulfill the needs of ISPs (Internet Service Providers) covering the most frequent demand of control and monitoring blocks in city networks. It is very convеnient for integration inside local telecommunication racks/cabinets in systems with centralized powering trough the free pairs in UTP/FTP cables (simple PoE).

You can open a comparison table of different models from here.

Input-output channels in NetControl 4RU1T1A:

  • reboot (normal close relay contact) of up to 4pcs branches (with ability of automatic reboot on PING lost to on IP address)

  • measurement of power supply voltage of the centralized system (до 110VAC/160VDC)

  • measurеment of rack/cabinet temperature or humidity (with external sensor TDS300 or HDS300)

  • integrated "theremoregulator" mode between temperature sensor and of the relay channels

  • alarm input (for mechanical contact/button) for signalization (SNMP trap) of rack/cabinet burglary

  • plastic case dimensions 118x72x35mm

 

Basic network function (for more see user manual)

  • 10 BASE-T Ethernet (NO CrossOver Autodetect);

  • Supported protocols ARP/DHCP/ICMP/TCP/IP/SNMP/TFTP client/WEB server

  • 802.1q VLAN support

  • SNMPv1 (ONLY snmpget/snmpset) protocol for access to all parameters and functions;

  • SNMP traps generation on input change;

  • Output signal generation on analog input change;

  • WEB access to all parameters and functions;

  • TFTP client for firmware update

 

Applications

  • control and monitoring in quarter and building telecom racks/cabinets

  • automatic reboot on PING lost of hung home network equipment (ADSL modem, routers, APs)
  • general purpose 4 channel relay module with Web/SNMP control
  • IP guarding

  • IP thermometer and thermoregulator; IP humidity meter

User manual and most recent firmware for NetControl

um iconUser Manual, SNMP MIB

NetControl Series_UM-2.21_en.pdf (07.2020) (Only for firmware 5.12+)

NetControl SNMP MIB v1.5 (11.2019)

firmwareLatest firmware image (also publicly available by TFTP at IP address 84.40.112.77)
IMPORTANT! Before updating, please read FirmwareRevisionHistory.txt file from archive
for information on how the new version will affect your current settings!

Firmware v5.31.zip (01.2021)

 

Archives for old hardware version (3.xx)

NetControl Series_UM-2.13_en.pdf
Firmware v3.17.zip (11.2017)

 

Application notes and example codes for integration of NetControl to different software systems.

php-logoControl and access NetControl with PHP (with SNMP and HTTP requests) new-icon

netcontrol-php.zip (10.2019)

 

logo domoticzNode-RED flow for integrating NetControl and Domoticz (MQTT) 

NetControl<->Domoticz Node-RED Flow (v2.1 updated 05.2020)

 

zabbix availableHost template for integration in Zabbix (SNMP)

NetControl HostTemplate for Zabbix (02.2018)

 

cactiHost template for integration in Cacti (SNMP)

NetControl HostTemplate for Cacti (02.2018)

logo pythonStoring alarm events to MySQL with Python code (MQTT) new-icon

netcontrol_mqtt2mysql.zip (02.2020)